home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
QRZ! Ham Radio 17
/
QRZ Ham Radio Callsign Database - Volume 17.iso
/
modfiles
/
dr110p.txt
< prev
next >
Wrap
Text File
|
2001-04-12
|
5KB
|
103 lines
Article 3527 of rec.radio.amateur.packet:
Newsgroups: rec.radio.amateur.packet
Path: west.West.Sun.COM!sun-barr!cs.utexas.edu!wupost!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!cbfsb!cbnewsb.cb.att.com!wa2ise
From: wa2ise@cbnewsb.cb.att.com (robert.f.casey)
Subject: 9600 baud mod for Alinco 110, 112, 1200 radios
Message-ID: <1992Jul26.043534.23205@cbfsb.cb.att.com>
Sender: news@cbfsb.cb.att.com
Organization: AT&T
Date: Sun, 26 Jul 1992 04:35:34 GMT
Lines: 50
copied from packet:
Msg# TSF Size #Rd Date Time From MsgID To
2183 BF 3482 0 21-Jul 1657 KC6RIX 476_WF6O ALINCO@USBBS ()
Sb: 110, 112, 1200 MODS SAME!
Hello FELLOW Packeteers! I just got off the phone with Matt from Alinco!
I have been asked if the 9600 baud Mod that I posted would also work for the
110. YES IT WILL! The 110, 112 and 1200 radios are identical except for
the power output of the 1200 (25-watts high power compared to the 45-watts of
the 110 and 112!) and the 112 has a LCD display to replace the piece of junk
one on the 110! Also, if you want to have more power in the 1200, you can buy
the 100/112 PA Board (45-watts) for $65.00 from Alinco. It also requires
buying 4 high power switching diodes for $20.00 from Alinco. $85.00 for
20-watts?...Doesn't sound like a good investment to me. Don't forget the time
involved with doing this mod. I discourage the use of HIGH POWER and have
posted bulletins on this subject! Never the less, I feel obligated to pass
this info on to you, I am not the U.S. Government, I will NOT keep things
from you! To follow is the 9600 baud Mod I received from Alinco. Alinco
warns that the Warranty is void if this Mod is performed! KA1BOY has been
great enough to try this Mod and says it works great for 1200 baud as well
as 9600 baud! From all of us to you, THANK YOU BARRY! One point to remember,
you will not be able to use the radio for voice. This mod uses the Mic
Connector...
TRANSMITTER
1. Remove R-31
2. Remove C-40 (save this part, it is to be reused!)
3. Connect one leg of C-40 to PIN 7 of the VCO Board
4. Connect a jumper from the free leg of C-40 to the HOT end of C-35
The MIC input is now connected DIRECTLY to the VCO!
RECEIVER
1. Disconnect the PINK wire connected to the MIC connector and the PC Board
from the PC Board
2. Reconnect the PINK wire to PIN 2 on the IF Board connector
This eliminates the low pass filtering on the discriminator!
That is it to the MOD for the 110, 112, and the 1200! Remember, you now use
the MIC Connector For inputting 9600 baud and it WILL work for 1200 baud!
A special note to all SYSOPS out there...Buy this radio and do this MOD! It
will allow users to set their TXDelay down to a lower setting giving the
channel MORE throughput! USERS, make a DONATION to your SYSOPS so they can
help make the system YOU are using, BETTER! We must all do our part to help!
I would like to hear from all of you that tries this MOD!
I GIVE PARTIAL CREDIT TO BARRY, KA1BOY, FOR HIS INPUT ON THIS MODIFICATION!!!
73 FELLOW PACKETEERS!!! DINO...KC6RIX @ WF6O.#SOCA.CA.USA.NA
==========================================================================
Note: I haven't tried or verified this, proceed at your own risk. WA2ISE
Article 3528 of rec.radio.amateur.packet:
Newsgroups: rec.radio.amateur.packet
Path: west.West.Sun.COM!sun-barr!ames!agate!stanford.edu!morrow.stanford.edu!pst
From: pst@cisco.com (Paul Traina)
#Subject: Re: 9600 baud mod for Alinco 110, 112, 1200 radios
In-Reply-To: wa2ise@cbnewsb.cb.att.com's message of Sun, 26 Jul 1992 04: 35:34 GMT
Message-ID: <PST.92Jul26125156@lager.cisco.com>
Sender: news@morrow.stanford.edu (News Service)
Organization: cisco Systems, Menlo Park, California
References: <1992Jul26.043534.23205@cbfsb.cb.att.com>
Date: Sun, 26 Jul 1992 20:51:55 GMT
Lines: 20
I have made this mod, and I have the following suggestions:
(a) you can get a "map" of the board via FAX or snail mail from Alinco
-- this helps a LOT (it's impossible to read component labels) --
Alinco is in Torrance Calif, in the phone directory.
(b) Throw away C40, it is impossible for a mere mortal to do what they
are suggesting. Replace that SMT C40 with an axial .01uf cap
(non-polarized, anything kind you want, I used a tant.) and some
insulation tubing over the leads (it needs to stretch 2 inches
across the bottom of the pcb.
Alinco claims this mod makes 1200bps unusable, untrue, I use my modded
1200 on both 1200 and 9600 bps without noticable degredation of
performance.
Regards,
Paul
--
% lookup ampallang
Word: "ampallang"
Suggestions: 1 employing 2 impaling 3 impelling 4 implying
Copied from the QRZ! Windows Ham Radio CDROM